<![CDATA[Zigbee2Mqtt startet nicht]]>Hallo,

nach langer Zeit wollte ich auf einem PC mit Proxmox den iobroker nebst zigbee2mqtt installieren.

leider bekomme ich immer noch bzw wieder keine lösung.

hier die fehlermeldung:

[2026-06-23 07:43:11] info:     z2m: Logging to console, file (filename: log.log)
[2026-06-23 07:43:11] info:     z2m: Starting Zigbee2MQTT version 2.12.0 (commit #fd8bafc8)
[2026-06-23 07:43:11] info:     z2m: Starting zigbee-herdsman (10.4.0)
[2026-06-23 07:43:11] error:    z2m: Error while starting zigbee-herdsman
[2026-06-23 07:43:11] error:    z2m: Failed to start zigbee-herdsman
[2026-06-23 07:43:11] error:    z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible >
[2026-06-23 07:43:11] error:    z2m: Exiting...
[2026-06-23 07:43:12] error:    z2m: Error: Cannot discover TCP adapters at this time. Specify valid 'adapter' and 'port' in your configuration.
    at findTcpAdapter (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@10.4.0/node_modules/zigbee-herdsman/src/adapter/adapterDiscovery.ts:598:15)
    at discoverAdapter (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@10.4.0/node_modules/zigbee-herdsman/src/adapter/adapterDiscovery.ts:626:20)
    at Adapter.create (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@10.4.0/node_modules/zigbee-herdsman/src/adapter/adapter.ts:66:49)
    at Controller.start (/opt/zigbee2mqtt/node_modules/.pnpm/zigbee-herdsman@10.4.0/node_modules/zigbee-herdsman/src/controller/controller.ts:140:38)
    at Zigbee.start (/opt/zigbee2mqtt/lib/zigbee.ts:70:48)
    at Controller.start (/opt/zigbee2mqtt/lib/controller.ts:117:29)
    at start (/opt/zigbee2mqtt/index.js:156:5)

Hier der Auszug aus der Config:

version: 5
homeassistant:
  enabled: false
frontend:
  enabled: true
mqtt:
  base_topic: zigbee2mqtt
  server: mqtt://localhost:1888
serial:
  port: tcp://192.168.0.33:6638
  baudrate: 115200

advanced:
  network_key:
    - 242
    - 67
    - 121
    - 197
    - 235

Hier die Info aus dem Zigbee Coordinator von Cod M:

# Serielle Konfiguration
serial:
# Standort von CZC
  port: tcp://192.168.0.33:6638
  baudrate: 115200
# Zigbee-LED deaktivieren?
	disable_led: false
# Ausgangsleistung auf maximum 20 dBm einstellen
advanced:
	transmit_power: 20

Der YAML-Validator sagt, dass es sich um valides YAML handelt.

Screen GUI Cod M:

8eb2d76a-6d98-4e3e-b730-f0f7514934b0-image.jpeg

]]>https://forum.iobroker.net/topic/84851/zigbee2mqtt-startet-nichtRSS for NodeTue, 23 Jun 2026 17:45:04 GMTTue, 23 Jun 2026 06:14:56 GMT60<![CDATA[Reply to Zigbee2Mqtt startet nicht on Tue, 23 Jun 2026 08:51:18 GMT]]>Hier scheint es das identische Problem mit

error: z2m: Could not init sd_notify: Could not locate the bindings file. Tried:"```
gegeben zu haben:

https://github.com/Koenkk/zigbee2mqtt/issues/26946

Jedoch versteh ich davon leider nix und habe daher eher die befürchtung, dass ich etwas verschlimmbessere.
]]>https://forum.iobroker.net/post/1345739https://forum.iobroker.net/post/1345739Tue, 23 Jun 2026 08:51:18 GMT<![CDATA[Reply to Zigbee2Mqtt startet nicht on Tue, 23 Jun 2026 08:25:29 GMT]]>Ca alle 2 min gibt es einen neuen Log:

root@iobroker:/opt/zigbee2mqtt/data/log# ls -la
total 48
drwxr-xr-x 12 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:23 .
drwxrwxr-x  3 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:23 ..
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:04 2026-06-23.10-04-24
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:06 2026-06-23.10-06-31
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:08 2026-06-23.10-08-37
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:10 2026-06-23.10-10-43
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:12 2026-06-23.10-12-49
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:14 2026-06-23.10-14-55
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:17 2026-06-23.10-17-02
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:22 2026-06-23.10-19-10
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:21 2026-06-23.10-21-17
drwxr-xr-x  2 zigbee-mqtt zigbee-mqtt 4096 Jun 23 10:23 2026-06-23.10-23-21
]]>https://forum.iobroker.net/post/1345735https://forum.iobroker.net/post/1345735Tue, 23 Jun 2026 08:25:29 GMT<![CDATA[Reply to Zigbee2Mqtt startet nicht on Tue, 23 Jun 2026 08:23:30 GMT]]>jetzt habe ich das in dem Log von http://192.168.0.20:8080/#/logs/0:

[23.6.2026, 10:18:37] frontend:ws: Failed to connect to WebSocket
[23.6.2026, 10:18:42] frontend:ws: Failed to connect to WebSocket
[23.6.2026, 10:18:47] frontend:ws: Failed to connect to WebSocket
[23.6.2026, 10:18:53] frontend:ws: Failed to connect to WebSocket
[23.6.2026, 10:18:58] frontend:ws: Failed to connect to WebSocket

Es scheint so, als wenn de rDienst immer wieder neustartet.

Hier ein logauszug vom z2m dienst:

[2026-06-23 10:19:10] info:     z2m: Logging to console, file (filename: log.log)
[2026-06-23 10:19:10] info:     z2m: Starting Zigbee2MQTT version 2.12.0 (commit #fd8bafc8)
[2026-06-23 10:19:10] info:     z2m: Starting zigbee-herdsman (10.4.0)
[2026-06-23 10:19:10] info:     zh:zstack:znp: Opening TCP socket with 192.168.0.33:6638
[2026-06-23 10:19:10] info:     zh:zstack:znp: Socket connected
[2026-06-23 10:19:10] info:     zh:zstack:znp: Socket ready
[2026-06-23 10:19:10] info:     zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload
[2026-06-23 10:19:11] info:     zh:zstack:znp: Skip bootloader for CC2652/CC1352
[2026-06-23 10:19:12] info:     z2m: zigbee-herdsman started (resumed)
[2026-06-23 10:19:12] info:     z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20250321,"tran>
[2026-06-23 10:19:12] info:     z2m: No_1_0xa81710b956320000 (0xa81710b956320000): CK-BL702-AL-01 - Tuya Zigbee LED bulb (Router)
[2026-06-23 10:19:12] info:     z2m: Currently 1 devices are joined.
[2026-06-23 10:19:12] info:     z2m: Connecting to MQTT server at mqtt://localhost:1888
[2026-06-23 10:19:12] info:     z2m: Connected to MQTT server
[2026-06-23 10:19:12] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/state', payload '{"state":"online"}'
[2026-06-23 10:19:12] info:     z2m: Started frontend on port 8080
[2026-06-23 10:19:12] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/No_1_0xa81710b956320000', payload '{"brightness":254,"color":{"hue":311,"satur>
[2026-06-23 10:19:12] info:     z2m: Zigbee2MQTT started!
[2026-06-23 10:19:12] error:    z2m: Could not init sd_notify: Could not locate the bindings file. Tried:
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/build/unix_dgram.node
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/build/Debug/unix_dgram.node
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/build/Release/unix_dgram.node
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/out/Debug/unix_dgram.node
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/Debug/unix_dgram.node
  ^f^r /opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.7/node_modules/unix-dgram/out/Release/unix_dgram.node

Listing vom Diretory:

root@iobroker:/opt/zigbee2mqtt/data/log# ls
2026-06-23.10-02-16  2026-06-23.10-06-31  2026-06-23.10-10-43  2026-06-23.10-14-55  2026-06-23.10-19-10
2026-06-23.10-04-24  2026-06-23.10-08-37  2026-06-23.10-12-49  2026-06-23.10-17-02  2026-06-23.10-21-17
]]>https://forum.iobroker.net/post/1345734https://forum.iobroker.net/post/1345734Tue, 23 Jun 2026 08:23:30 GMT<![CDATA[Reply to Zigbee2Mqtt startet nicht on Tue, 23 Jun 2026 07:56:03 GMT]]>@Asgothian oh mann der baum im wald. jetzt klappt es so wie es aussieht
Dir vielen Dank!

]]>https://forum.iobroker.net/post/1345731https://forum.iobroker.net/post/1345731Tue, 23 Jun 2026 07:56:03 GMT<![CDATA[Reply to Zigbee2Mqtt startet nicht on Tue, 23 Jun 2026 06:52:19 GMT]]>Die Fehlermeldung sagt bereits wo Dein Problem (und die Lösung) versteckt sind:

Error: Cannot discover TCP adapters at this time. Specify valid 'adapter' and 'port' in your configuration.

port ist in deiner Konfiguration enthalten
adapter nicht.

Dieses Dokument (https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html) sollte Dir sagen was du einstellen kannst / musst.

A.

]]>https://forum.iobroker.net/post/1345723https://forum.iobroker.net/post/1345723Tue, 23 Jun 2026 06:52:19 GMT