<![CDATA[UPNP Adapter - Fehler jsonConfig]]>Hallo ich bekomme seit kurzem die Fehlermeldung, sobald ich auf
"benutzerdefinierte Einstellungen" = Zahnrad im Objekte Bereich befinde:

Cannot load jsonConfig of upnp: Not exists

UpNp fehlt auch hier:

b172a1fa-ee26-4878-9b69-d232c60bce15-image.png

]]>https://forum.iobroker.net/topic/45376/upnp-adapter-fehler-jsonconfigRSS for NodeSun, 24 May 2026 23:37:27 GMTThu, 27 May 2021 19:09:03 GMT60<![CDATA[Reply to UPNP Adapter - Fehler jsonConfig on Fri, 28 May 2021 11:49:02 GMT]]>Bei mir war weg, als ich die Freigaben in der Fritzbox neu gesetzt habe:

e04f1ea4-d09f-4e70-8305-15481d7c685e-image.png
FritzOs 7.26 | Fritz! 6660

Was beim deaktivieren einen Neustart verursacht und dann wieder neu setzen >> wieder Neustart

]]>https://forum.iobroker.net/post/635499https://forum.iobroker.net/post/635499Fri, 28 May 2021 11:49:02 GMT<![CDATA[Reply to UPNP Adapter - Fehler jsonConfig on Fri, 28 May 2021 11:35:01 GMT]]>@tg70

Fehler habe ich auch noch mit Version 1.0.19

Screenshot (3844).png

UND:



upnp.0
2021-05-28 13:32:13.717	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.702	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.686	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.671	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.655	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesSent" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.640	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesReceived" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.626	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.AutoDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.608	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.IdleDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:13.422	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.UpnpControlEnabled" has to be type "boolean" but received type "string"

upnp.0
2021-05-28 13:32:13.389	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.RoutedBridgedModeBoth" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.506	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.482	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.459	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.435	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.411	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesSent" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.396	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesReceived" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.380	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.AutoDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.365	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.IdleDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:09.287	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.UpnpControlEnabled" has to be type "boolean" but received type "string"

upnp.0
2021-05-28 13:32:09.272	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.RoutedBridgedModeBoth" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.363	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.346	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.329	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.314	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.298	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesSent" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.282	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.TotalBytesReceived" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.265	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.AutoDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.249	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.IdleDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-05-28 13:32:00.171	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_6590_Cable.WANDevice.WANCommonInterfaceConfig.UpnpControlEnabled" has to be type "boolean" but received type "string"

Plattform: Windows
RAM: 16 GB
Node.js: 12.22.1
NPM: 6.14.12
JS Controller: 3.3.11
Admin: 5.1.4
Web: 3.4.1
Socket.io: 3.1.4
Script Engine: 5.1.3

]]>https://forum.iobroker.net/post/635496https://forum.iobroker.net/post/635496Fri, 28 May 2021 11:35:01 GMT<![CDATA[Reply to UPNP Adapter - Fehler jsonConfig on Fri, 28 May 2021 11:08:11 GMT]]>Was ich gerade sehe, dass mir die verfügbare Bandbreite nicht angezeigt wird?

9c729fee-f5b4-4135-9018-c752e8556a6d-image.png

]]>https://forum.iobroker.net/post/635488https://forum.iobroker.net/post/635488Fri, 28 May 2021 11:08:11 GMT<![CDATA[Reply to UPNP Adapter - Fehler jsonConfig on Fri, 28 May 2021 08:24:24 GMT]]>@foxriver76 sagte in UPNP Adapter - Fehler jsonConfig:

EDIT: habe eine 1.0.19 veröffentlicht, mit der sollte es gehen.

Super. Vielen Dank @foxriver76 👍
Mit der 1.0.19 läuft die Sache wieder wie gewohnt !!

]]>https://forum.iobroker.net/post/635449https://forum.iobroker.net/post/635449Fri, 28 May 2021 08:24:24 GMT<![CDATA[Reply to UPNP Adapter - Fehler jsonConfig on Fri, 28 May 2021 08:01:26 GMT]]>@tg70 Welche Version von UPNP?

Die Fehlermeldung ist auch bissl strange, müsste an der Stelle wenn dann Cannot load jsonCustom .. heißen. Ab 1.0.18 sollte UPNP mit Admin 5 laufen.

Sehe gerade aufgrund von Fehlern konnte BF die 1.0.18 nicht veröffentlichen. Ich schaue mal dass die gleich kommt.

EDIT: habe eine 1.0.19 veröffentlicht, mit der sollte es gehen.

]]>https://forum.iobroker.net/post/635428https://forum.iobroker.net/post/635428Fri, 28 May 2021 08:01:26 GMT