IoBroker down - Cannot read system
-
okay, hat jetzt funktioniert. Danke!
Hab schon mehrfach aktualisiert und neu gestartet aber bislang hat sich nichts getan. Kurios manchmal...
-
@prince3k sagte in IoBroker down - Cannot read system:
Gerne, biete mich auch als Versuchskannichnen an
Kannst du mal schauen ob du unter
ls -la iobroker-data/backup-objects/was liegen hast?
-
ich hatte nun das backup wieder eingespielt und gleich zu Beginn kam folgendes:
[DEBUG] [iobroker] Start ioBroker Restore ... [DEBUG] [iobroker] iobroker controller daemon is not running [DEBUG] [iobroker] host.raspberrypi4-iob OK. [DEBUG] [iobroker] host.raspberrypi4-iob Clear all objects and states... [DEBUG] [iobroker] clean 545 objects... [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object 0_userdata.0: {"command":{"name":"del","args":["cfg.o.0_userdata.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object alias.0: {"command":{"name":"del","args":["cfg.o.alias.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.functions: {"command":{"name":"del","args":["cfg.o.enum.functions"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.rooms: {"command":{"name":"del","args":["cfg.o.enum.rooms"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object system.config: {"command":{"name":"del","args":["cfg.o.system.config"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object system.repositories: {"command":{"name":"del","args":["cfg.o.system.repositories"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:37894 Error from InMemDB: Error: Object is marked as non deletableDanach lief alles durch.
ls -la iobroker-data/backup-objects/ spuckt folgendes aus:
pi@raspberrypi4-iob:/opt/iobroker $ ls -la iobroker-data/backup-objects/ insgesamt 38640 drwxrwxrwx+ 2 iobroker iobroker 4096 Mär 2 19:32 . drwxrwxrwx+ 10 iobroker iobroker 4096 Mär 2 19:54 .. -rw-rwxr--+ 1 iobroker iobroker 1802812 Feb 27 16:32 2021-02-27_16-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1802810 Feb 27 18:32 2021-02-27_18-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1802809 Feb 27 20:32 2021-02-27_20-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1803544 Feb 27 22:32 2021-02-27_22-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1803557 Feb 28 00:32 2021-02-28_00-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1803561 Feb 28 02:32 2021-02-28_02-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343303 Feb 28 02:45 2021-02-28_02-45_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803550 Feb 28 04:32 2021-02-28_04-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343258 Feb 28 04:45 2021-02-28_04-45_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803601 Feb 28 06:32 2021-02-28_06-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343413 Feb 28 06:46 2021-02-28_06-46_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803559 Feb 28 08:32 2021-02-28_08-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343086 Feb 28 08:46 2021-02-28_08-46_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803524 Feb 28 10:32 2021-02-28_10-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343412 Feb 28 10:47 2021-02-28_10-47_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803506 Feb 28 12:32 2021-02-28_12-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343333 Feb 28 12:47 2021-02-28_12-47_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803505 Feb 28 14:32 2021-02-28_14-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343362 Feb 28 14:47 2021-02-28_14-47_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803495 Feb 28 16:32 2021-02-28_16-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343043 Feb 28 16:48 2021-02-28_16-48_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803541 Feb 28 18:32 2021-02-28_18-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343621 Feb 28 18:48 2021-02-28_18-48_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1803534 Feb 28 20:32 2021-02-28_20-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343259 Feb 28 20:49 2021-02-28_20-49_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1804845 Feb 28 22:32 2021-02-28_22-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343315 Feb 28 22:49 2021-02-28_22-49_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 3515 Feb 28 23:55 2021-02-28_23-55_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343377 Mär 1 21:58 2021-03-01_21-58_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 3518 Mär 1 22:14 2021-03-01_22-14_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343412 Mär 1 22:18 2021-03-01_22-18_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 3518 Mär 1 22:21 2021-03-01_22-21_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342361 Mär 1 22:22 2021-03-01_22-22_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342358 Mär 1 23:11 2021-03-01_23-11_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342358 Mär 2 13:06 2021-03-02_13-06_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 11306 Mär 2 13:18 2021-03-02_13-18_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342362 Mär 2 13:18 2021-03-02_13-18_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342347 Mär 2 13:40 2021-03-02_13-40_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342347 Mär 2 13:46 2021-03-02_13-46_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 11307 Mär 2 13:55 2021-03-02_13-55_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 342342 Mär 2 13:56 2021-03-02_13-56_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 342363 Mär 2 15:56 2021-03-02_15-56_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 14327 Mär 2 17:47 2021-03-02_17-47_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 342375 Mär 2 17:56 2021-03-02_17-56_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 612535 Mär 2 19:26 2021-03-02_19-26_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 344607 Mär 2 19:27 2021-03-02_19-27_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 1725614 Mär 2 19:32 2021-03-02_19-32_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 343410 Mär 2 19:32 2021-03-02_19-32_states.js on.gz pi@raspberrypi4-iob:/opt/iobroker $ -
@prince3k Schon ewig kein restore mehr benötigt (klopfe auf Holz), keine Ahnung ob das beim restore normale Errors sind weil er ja von der leeren ioBroker installation auf dein Backup umbaut.
Wenn du nochmal ein Problem wie heute bekommst kann man versuchen aus dem Backup in diesem Ordner das System wieder herzustellen.
-
@wendy2702 ich sehe aber nach dem restore immer jedoch nur die 3 instanzen : admin, backitup und info, was mache ich falsch ?
-
@prince3k wie machst du den restore?
Backitup Adapter oder manuel?
-
Ich habe es über den backitup Adapter gemacht.
-
@prince3k Wie lange hast du nach dem ausführen des restore gewartet?
Ja nach Systemleistung, Anzahl der zu installieren Adapter und Instanzen kann das schon etwas dauern.
Am besten verfolgt man das im iobroker log und lässt das System in dieser Zeit in Ruhe.
tail -f /opt/iobroker/log/iobroker.current.logHast du das log nach dem restore? Sollte eigentlich im Ordner:
/opt/iobroker/log/liegen. Da mal schauen ob Adapter installiert wurden.
Was kommt denn nach dem restore der jetzt ja durch sein sollte bei:
iobroker list instances iobroker list adapters -
vielen Dank.
Das Log hatte ich parallel auf und dies dauerte wirklich sehr lange.
Jetzt habe ich nochmal auf den Iobroker geschaut und alles ist wieder da. -
und wieder ist iobroker weg.
KOmme heute nach Hause und der Pie ist nicht erreichbar. Ich starte den Pie neu, kann mich auch auf den Pie einloggen, ioBroker funktioniert mal wieder nicht.
pi@raspberrypi4-iob:~ $ iobroker list instances Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" + instance is alivepi@raspberrypi4-iob:~ $ iobroker list adapters Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" system.adapter.admin : admin - v4.1.13pi@raspberrypi4-iob:/opt/iobroker $ ls -la iobroker-data/backup-objects/ insgesamt 35440 drwxrwxrwx+ 2 iobroker iobroker 4096 Mär 4 20:05 . drwxrwxrwx+ 10 iobroker iobroker 4096 Mär 4 20:08 .. -rw-rwxr--+ 1 iobroker iobroker 3518 Mär 1 22:21 2021-03-01_22-21_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 11306 Mär 2 13:18 2021-03-02_13-18_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 11307 Mär 2 13:55 2021-03-02_13-55_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 14327 Mär 2 17:47 2021-03-02_17-47_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 612535 Mär 2 19:26 2021-03-02_19-26_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 1725614 Mär 2 19:32 2021-03-02_19-32_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 343410 Mär 2 19:32 2021-03-02_19-32_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1725480 Mär 2 20:00 2021-03-02_20-00_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342609 Mär 2 20:01 2021-03-02_20-01_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342642 Mär 2 22:01 2021-03-02_22-01_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1725479 Mär 2 22:39 2021-03-02_22-39_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342685 Mär 3 00:01 2021-03-03_00-01_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342674 Mär 3 02:01 2021-03-03_02-01_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342692 Mär 3 04:02 2021-03-03_04-02_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1725512 Mär 3 05:06 2021-03-03_05-06_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342721 Mär 3 06:02 2021-03-03_06-02_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342687 Mär 3 08:02 2021-03-03_08-02_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1725481 Mär 3 08:06 2021-03-03_08-06_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 342682 Mär 3 10:02 2021-03-03_10-02_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342716 Mär 3 12:03 2021-03-03_12-03_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 342695 Mär 3 14:03 2021-03-03_14-03_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1725481 Mär 3 14:38 2021-03-03_14-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 317694 Mär 3 16:03 2021-03-03_16-03_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727329 Mär 3 16:38 2021-03-03_16-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 317854 Mär 3 18:04 2021-03-03_18-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727343 Mär 3 18:38 2021-03-03_18-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 317693 Mär 3 20:04 2021-03-03_20-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727308 Mär 3 20:38 2021-03-03_20-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 317964 Mär 3 22:04 2021-03-03_22-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727325 Mär 3 22:38 2021-03-03_22-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318003 Mär 4 00:04 2021-03-04_00-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727332 Mär 4 00:38 2021-03-04_00-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318111 Mär 4 02:04 2021-03-04_02-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727330 Mär 4 02:38 2021-03-04_02-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318225 Mär 4 04:04 2021-03-04_04-04_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727326 Mär 4 04:38 2021-03-04_04-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318150 Mär 4 06:05 2021-03-04_06-05_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727364 Mär 4 06:38 2021-03-04_06-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318203 Mär 4 08:05 2021-03-04_08-05_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727334 Mär 4 08:38 2021-03-04_08-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318181 Mär 4 10:05 2021-03-04_10-05_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 1727341 Mär 4 10:38 2021-03-04_10-38_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318144 Mär 4 12:05 2021-03-04_12-05_states.js on.gz -rw-rwxr--+ 1 iobroker iobroker 3513 Mär 4 12:17 2021-03-04_12-17_objects.j son.gz -rw-rwxr--+ 1 iobroker iobroker 318097 Mär 4 19:56 2021-03-04_19-56_states.js on.gz -rw-rw-r--+ 1 iobroker iobroker 11305 Mär 4 20:03 2021-03-04_20-03_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 11307 Mär 4 20:05 2021-03-04_20-05_objects.j son.gz -rw-rw-r--+ 1 iobroker iobroker 318131 Mär 4 20:05 2021-03-04_20-05_states.js on.gzpi@raspberrypi4-iob:/opt/iobroker $ iobroker upload all Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png Cannot find view "system" for search "instance" -
@prince3k sagte in IoBroker down - Cannot read system:
KOmme heute nach Hause und der Pie ist nicht erreichbar.
Per SSH oder auch nicht mehr im Browser?
Poste mal das linux syslog aus
/var/log/posten und die Ausgabe davon
df -h dmesgHast doch jetzt ein Backup, oder?
Wie sieht die Stromversorgung des PI aus?
Läuft noch etwas anderes auf dem PI?
Weitere HW angeschlossen?
Kannst auch mal diesen Weg zum restore probieren..
-
syslog als file, da ich hier ansonsten nix posten kann.
pi@raspberrypi4-iob:~ $ df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf /dev/root 29G 5,8G 22G 21% / devtmpfs 1,8G 0 1,8G 0% /dev tmpfs 1,9G 0 1,9G 0% /dev/shm tmpfs 1,9G 17M 1,9G 1% /run tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 1,9G 0 1,9G 0% /sys/fs/cgroup /dev/mmcblk0p1 253M 48M 205M 19% /boot tmpfs 383M 0 383M 0% /run/user/1000 pi@raspberrypi4-iob:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.11-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1399 SMP Thu Jan 28 12:09:48 GMT 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writeallochttps://forum.iobroker.net/topic/42829/iobroker-down-cannot-read-system/25#[syslog](/assets/uploads/files/1614890456793-syslog) [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50636 r8192 d23092 u81920 [ 0.000000] pcpu-alloc: s50636 r8192 d23092 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:19:03:5B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=6d49409f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000017cc0000-0x000000001bcc0000] (64MB) [ 0.000000] Memory: 3654944K/4050944K available (10240K kernel code, 1354K rwdata, 3152K rodata, 2048K init, 890K bss, 133856K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 33824 entries in 67 pages [ 0.000000] ftrace: allocated 67 pages with 3 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000035] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000100] bcm2835: system timer (irq = 25) [ 0.000743] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000765] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000788] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000806] Switching to timer-based delay loop, resolution 18ns [ 0.001055] Console: colour dummy device 80x30 [ 0.001797] printk: console [tty1] enabled [ 0.001864] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001917] pid_max: default: 32768 minimum: 301 [ 0.002100] LSM: Security Framework initializing [ 0.002295] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002341] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003925] Disabling memory control group subsystem [ 0.004058] CPU: Testing write buffer coherency: ok [ 0.004528] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005755] Setting up static identity map for 0x200000 - 0x20003c [ 0.005968] rcu: Hierarchical SRCU implementation. [ 0.006906] smp: Bringing up secondary CPUs ... [ 0.008125] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009496] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010806] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010964] smp: Brought up 1 node, 4 CPUs [ 0.011010] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.011039] CPU: All CPU(s) started in HYP mode. [ 0.011066] CPU: Virtualization extensions available. [ 0.011906] devtmpfs: initialized [ 0.025678] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025989] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.032691] pinctrl core: initialized pinctrl subsystem [ 0.033785] NET: Registered protocol family 16 [ 0.037823] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.038626] audit: initializing netlink subsys (disabled) [ 0.038899] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.039472] thermal_sys: Registered thermal governor 'step_wise' [ 0.040174] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.040228] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.040622] Serial: AMBA PL011 UART driver [ 0.072382] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090892] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-27T22:19:57, variant start [ 0.100906] raspberrypi-firmware soc:firmware: Firmware hash is 99d9a48302e4553cff3688692bb7e9ac760a03fa [ 0.145897] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.150073] vgaarb: loaded [ 0.150530] SCSI subsystem initialized [ 0.150772] usbcore: registered new interface driver usbfs [ 0.150848] usbcore: registered new interface driver hub [ 0.151024] usbcore: registered new device driver usb [ 0.151604] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.153508] clocksource: Switched to clocksource arch_sys_counter [ 1.179481] VFS: Disk quotas dquot_6.6.0 [ 1.179607] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.179808] FS-Cache: Loaded [ 1.180001] CacheFiles: Loaded [ 1.189044] NET: Registered protocol family 2 [ 1.189940] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.190099] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.190180] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.190266] TCP: Hash tables configured (established 8192 bind 8192) [ 1.190437] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.190492] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.190775] NET: Registered protocol family 1 [ 1.191520] RPC: Registered named UNIX socket transport module. [ 1.191554] RPC: Registered udp transport module. [ 1.191583] RPC: Registered tcp transport module. [ 1.191611] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.191649] PCI: CLS 0 bytes, default 64 [ 1.194543] Initialise system trusted keyrings [ 1.194809] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.203125] zbud: loaded [ 1.204944] FS-Cache: Netfs 'nfs' registered for caching [ 1.205888] NFS: Registering the id_resolver key type [ 1.205950] Key type id_resolver registered [ 1.205980] Key type id_legacy registered [ 1.206143] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.207173] Key type asymmetric registered [ 1.207205] Asymmetric key parser 'x509' registered [ 1.207411] bounce: pool size: 64 pages [ 1.207496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.207731] io scheduler mq-deadline registered [ 1.207763] io scheduler kyber registered [ 1.212198] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.212251] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.212351] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.212460] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.265651] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.266032] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.266069] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.266104] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.266215] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.266474] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.269910] PCI: bus0: Fast back to back transfers disabled [ 1.269950] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.270258] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.270346] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.270623] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.273962] PCI: bus1: Fast back to back transfers disabled [ 1.273999] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.274055] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.274094] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.274157] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.274196] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.274618] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.274875] pcieport 0000:00:00.0: PME: Signaling with IRQ 62 [ 1.283251] iproc-rng200 fe104000.rng: hwrng registered [ 1.283626] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.284469] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.297441] brd: module loaded [ 1.309517] loop: module loaded [ 1.311168] Loading iSCSI transport class v2.0-870. [ 1.313666] libphy: Fixed MDIO Bus: probed [ 1.314944] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.333537] libphy: bcmgenet MII bus: probed [ 1.423658] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.424821] usbcore: registered new interface driver r8152 [ 1.424907] usbcore: registered new interface driver lan78xx [ 1.424998] usbcore: registered new interface driver smsc95xx [ 1.426516] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [ 1.426635] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.426684] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.429840] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [ 1.430813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.430853] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.430889] usb usb1: Product: xHCI Host Controller [ 1.430919] usb usb1: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [ 1.430951] usb usb1: SerialNumber: 0000:01:00.0 [ 1.431690] hub 1-0:1.0: USB hub found [ 1.431787] hub 1-0:1.0: 1 port detected [ 1.432421] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.432464] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.432509] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.432957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.432996] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.433032] usb usb2: Product: xHCI Host Controller [ 1.433062] usb usb2: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [ 1.433093] usb usb2: SerialNumber: 0000:01:00.0 [ 1.433859] hub 2-0:1.0: USB hub found [ 1.433945] hub 2-0:1.0: 4 ports detected [ 1.435594] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.435915] dwc_otg: FIQ enabled [ 1.435929] dwc_otg: NAK holdoff enabled [ 1.435944] dwc_otg: FIQ split-transaction FSM enabled [ 1.435963] Module dwc_common_port init [ 1.436398] usbcore: registered new interface driver uas [ 1.436534] usbcore: registered new interface driver usb-storage [ 1.436748] mousedev: PS/2 mouse device common for all mice [ 1.438380] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.441900] sdhci: Secure Digital Host Controller Interface driver [ 1.441936] sdhci: Copyright(c) Pierre Ossman [ 1.442654] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.443313] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.447473] ledtrig-cpu: registered to indicate activity on CPUs [ 1.447822] hid: raw HID events driver (C) Jiri Kosina [ 1.448039] usbcore: registered new interface driver usbhid [ 1.448069] usbhid: USB HID core driver [ 1.453785] Initializing XFRM netlink socket [ 1.453848] NET: Registered protocol family 17 [ 1.453981] Key type dns_resolver registered [ 1.454364] Registering SWP/SWPB emulation handler [ 1.454541] registered taskstats version 1 [ 1.454581] Loading compiled-in X.509 certificates [ 1.455422] Key type ._fscrypt registered [ 1.455454] Key type .fscrypt registered [ 1.455482] Key type fscrypt-provisioning registered [ 1.466888] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.467213] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.467318] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.474083] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.475168] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.475203] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.508626] of_cfs_init [ 1.508914] of_cfs_init: OK [ 1.523859] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.525537] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.527272] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.530262] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.531934] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.539794] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.540847] Waiting for root device PARTUUID=6d49409f-02... [ 1.579004] random: fast init done [ 1.641759] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 1.642699] mmcblk0: mmc0:aaaa SC32G 29.7 GiB [ 1.647611] mmcblk0: p1 p2 [ 1.647859] mmc1: new high speed SDIO card at address 0001 [ 1.680302] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.680396] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.685566] devtmpfs: mounted [ 1.694439] Freeing unused kernel memory: 2048K [ 1.723865] Run /sbin/init as init process [ 1.723895] with arguments: [ 1.723910] /sbin/init [ 1.723924] with environment: [ 1.723938] HOME=/ [ 1.723952] TERM=linux [ 1.793564] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.976088] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.976136] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.976170] usb 1-1: Product: USB2.0 Hub [ 1.978050] hub 1-1:1.0: USB hub found [ 1.978357] hub 1-1:1.0: 4 ports detected [ 2.303564] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd [ 2.377434] systemd[1]: System time before build time, advancing clock. [ 2.442844] usb 1-1.3: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09 [ 2.442892] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.442928] usb 1-1.3: Product: TI CC2531 USB CDC [ 2.442959] usb 1-1.3: Manufacturer: Texas Instruments [ 2.442989] usb 1-1.3: SerialNumber: __0X00124B001936648E [ 2.474482] NET: Registered protocol family 10 [ 2.475899] Segment Routing with IPv6 [ 2.553837] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.554648] systemd[1]: Detected architecture arm. [ 2.627243] systemd[1]: Set hostname to <raspberrypi4-iob>. [ 3.373957] random: systemd: uninitialized urandom read (16 bytes read) [ 3.386191] random: systemd: uninitialized urandom read (16 bytes read) [ 3.393138] systemd[1]: Listening on Journal Audit Socket. [ 3.394019] random: systemd: uninitialized urandom read (16 bytes read) [ 3.394398] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.395432] systemd[1]: Listening on Syslog Socket. [ 3.396322] systemd[1]: Listening on udev Kernel Socket. [ 3.396838] systemd[1]: Reached target Swap. [ 3.398182] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.399185] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.142557] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.235246] systemd-journald[111]: Received request to flush runtime journal from PID 1 [ 4.760154] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 4.760693] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 4.761203] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 4.761687] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 4.871034] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.881521] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.881547] [vc_sm_connected_init]: start [ 4.885124] [vc_sm_connected_init]: installed successfully [ 4.887145] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.892896] bcm2835_audio bcm2835_audio: card created with 8 channels [ 4.917762] mc: Linux media interface: v0.10 [ 4.983687] videodev: Linux video capture interface: v2.00 [ 5.031249] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.059350] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.063747] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.076325] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.088835] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.100818] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.100869] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.101330] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.104002] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.109304] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.109336] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.109361] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.109384] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.109407] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.109657] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.111442] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.111506] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.128956] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.129004] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.130375] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.285677] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.335914] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.354238] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.355125] usbcore: registered new interface driver brcmfmac [ 5.378956] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 5.616018] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.632594] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 5.657362] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 5.661029] usbcore: registered new interface driver cdc_acm [ 5.661048] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.829530] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 5.829656] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 5.830132] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 5.860015] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 7.626262] random: crng init done [ 7.626285] random: 7 urandom warning(s) missed due to ratelimiting [ 7.687190] uart-pl011 fe201000.serial: no DMA platform data [ 7.818825] 8021q: 802.1Q VLAN Support v1.8 [ 7.953616] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.058171] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 8.280115] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 8.280383] bcmgenet fd580000.ethernet eth0: Link is Down [ 12.473806] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.473864] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.316399] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 14.477585] Bluetooth: Core ver 2.22 [ 14.477680] NET: Registered protocol family 31 [ 14.477694] Bluetooth: HCI device and connection manager initialized [ 14.477720] Bluetooth: HCI socket layer initialized [ 14.477740] Bluetooth: L2CAP socket layer initialized [ 14.477770] Bluetooth: SCO socket layer initialized [ 14.489414] Bluetooth: HCI UART driver ver 2.3 [ 14.489433] Bluetooth: HCI UART protocol H4 registered [ 14.489524] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 14.489792] Bluetooth: HCI UART protocol Broadcom registered [ 14.720950] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.720959] Bluetooth: BNEP filters: protocol multicast [ 14.720975] Bluetooth: BNEP socket layer initializedBackups habe ich genug auf meiner Cloud
Stromversorgung via USB und Netzteil speziell für den Pi4 // 5V 3A
es läuft ansonsten nichts auf dem Pie
HW : Zigbee Stick CC2531 via USB VErlängerungskabelpi@raspberrypi4-iob:~ $ iobroker status Cannot read system.config: null (OK when migrating or restoring) Cannot find view "system" for search "host" iobroker is running on this host. Objects type: file States type: file pi@raspberrypi4-iob:~ $ iobroker stop pi@raspberrypi4-iob:~ $ cd /opt/iobroker/iobroker-data/ pi@raspberrypi4-iob:/opt/iobroker/iobroker-data $ mv objects.json objects.json.old pi@raspberrypi4-iob:/opt/iobroker/iobroker-data $ mv states.json states.json.old pi@raspberrypi4-iob:/opt/iobroker/iobroker-data $ cd backup-objects/ pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $ gunzip -c "2021-03-04_00-38_objects.json.gz" > /opt/iobroker/iobroker-data/objects.json pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $ gunzip -c "2021-03-04_00-04__states.json.gz" > /opt/iobroker/iobroker-data/states.json gzip: 2021-03-04_00-04__states.json.gz: No such file or directory pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $ gunzip -c "2021-03-04_00-04_states.json.gz" > /opt/iobroker/iobroker-data/states.json pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $ ls -la /opt/iobroker/iobroker-data/ insgesamt 12652 drwxrwxrwx+ 10 iobroker iobroker 4096 Mär 4 21:34 . drwxrwxrwx+ 9 iobroker iobroker 4096 Mär 4 20:00 .. drwxrwxrwx+ 2 iobroker iobroker 4096 Mär 4 20:05 backup-objects drwxrwxrwx+ 68 iobroker iobroker 4096 Feb 22 21:49 files drwxrwxr-x+ 2 iobroker iobroker 4096 Feb 22 21:51 history -rwxrwxrwx+ 1 iobroker iobroker 3931 Mär 2 19:26 iobroker.json drwxrwxr-x+ 2 iobroker iobroker 4096 Mai 27 2020 lgtv_0 -rw-rwxr--+ 1 iobroker iobroker 110 Mär 4 21:28 notifications.json -rw-rw-r--+ 1 pi pi 8740849 Mär 4 21:33 objects.json -rw-rw-r--+ 1 iobroker iobroker 30590 Mär 4 20:05 objects.json.bak -rw-rw-r--+ 1 iobroker iobroker 30590 Mär 4 20:10 objects.json.old drwxrwxr-x+ 2 iobroker iobroker 4096 Jan 8 18:30 sayit -rw-rw-r--+ 1 pi pi 1367961 Mär 4 21:35 states.json -rw-rw-r--+ 1 iobroker iobroker 1367598 Mär 4 21:27 states.json.bak -rw-rw-r--+ 1 iobroker iobroker 1360290 Mär 4 21:28 states.json.old drwxrwxr-x+ 4 iobroker iobroker 4096 Okt 23 2019 tuya_0 drwxrwxrwx+ 2 iobroker iobroker 4096 Mär 4 11:39 zigbee_0 drwxrwxr-x+ 2 iobroker iobroker 4096 Feb 26 22:27 zigbee_1 pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $ iobroker start pi@raspberrypi4-iob:/opt/iobroker/iobroker-data/backup-objects $log spuckt einige errors aus, das einige Adapter bereits laufen und nach 1 Minute läuft plötzlich iobroker wieder.
Es geht wieder. Danke
-
-
Aus dem Syslog:
Error: spawn ffmpeg ENOENT Mar 4 08:26:48 raspberrypi4-iob bash[558]: at Process.ChildProcess._handle.onexit (internal/child_process.js:240:19) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at onErrorNT (internal/child_process.js:415:16) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at process._tickCallback (internal/process/next_tick.js:63:19) Mar 4 08:26:48 raspberrypi4-iob bash[558]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason: Mar 4 08:26:48 raspberrypi4-iob bash[558]: Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed Mar 4 08:26:48 raspberrypi4-iob bash[558]: at doWrite (_stream_writable.js:411:19) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at writeOrBuffer (_stream_writable.js:399:5) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at Socket.Writable.write (_stream_writable.js:299:11) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at FfmpegProcess.start (/opt/iobroker/node_modules/iobroker.ring/node_modules/ring-client-api/lib/api/ffmpeg.js:76:23) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at SipSession.<anonymous> (/opt/iobroker/node_modules/iobroker.ring/node_modules/ring-client-api/lib/api/sip-session.js:125:16) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at Generator.next (<anonymous>) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at fulfilled (/opt/iobroker/node_modules/iobroker.ring/node_modules/ring-client-api/lib/api/sip-session.js:5:58) Mar 4 08:26:48 raspberrypi4-iob bash[558]: at process._tickCallback (internal/process/next_tick.js:68:7)Möglicherweise ist das der Grund für deinen "Absturz"
-
Danke, dann werde ich den Adapter erst einmal deaktivieren und schauen, ob noch ein Absturz erfolgt und anschließend versuchen, den Fehler zu beheben.
