2025-03-09 07:35:19.737 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:19.739 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 6000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950170
}
"
2025-03-09 07:35:20.038 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:20.040 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51583,
"E total": 569513,
"Serial": "28345628",
"Sec": 1950170
}
"
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) amperage of mains: 2300/3160/2450, amperage of charging station: 0/0/0 => available: 29700/28840/29550
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) Available max amperage: 29000
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) Available surplus: -1487.6200000000001
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) pvAutomaticsActive: true, vehicleIsPlugged: true
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) power: -1487.6200000000001 / voltage: 230 * 1000 / delta: 500 / phases: 3 * delta = -2155.9710144927535
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) first calculation for current is -2000
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) power: -1487.6200000000001 / voltage: 230 * 1000 / delta: 500 / phases: 1 * delta = -6467.913043478261
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) new current due to 1p charging is -6500
2025-03-09 07:35:20.105 - debug: kecontact.0 (118391) not enough power for charging ...
2025-03-09 07:35:20.338 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:20.339 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51583,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950171
}
"
2025-03-09 07:35:20.339 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:22.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817042
}
"
2025-03-09 07:35:22.639 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:22.721 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:22.937 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 2914,
"E total": 76997560,
"Serial": "17405468",
"Sec": 817042
}
"
2025-03-09 07:35:22.938 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:22.976 - info: kecontact.0 (118391) change of photovoltaics automatic from true to false
2025-03-09 07:35:22.976 - debug: kecontact.0 (118391) set automatic.photovoltaics to false
2025-03-09 07:35:22.976 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:22.978 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 6000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950173
}
"
2025-03-09 07:35:23.004 - info: kecontact.0 (118391) change pause status of wallbox from false to true
2025-03-09 07:35:23.004 - debug: kecontact.0 (118391) set automatic.pauseWallbox to true
2025-03-09 07:35:23.007 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:23.239 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 2914,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817042
}
"
2025-03-09 07:35:23.244 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:23.280 - debug: kecontact.0 (118391) Sent "display 0 0 0 0 volle$Ladeleistung" to 192.168.5.25:7090
2025-03-09 07:35:23.345 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:23.372 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:23.372 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:23.581 - debug: kecontact.0 (118391) Sent "display 0 0 0 0 Boxsperre" to 192.168.5.25:7090
2025-03-09 07:35:23.591 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:23.592 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:23.882 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:23.884 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51583,
"E total": 569513,
"Serial": "28345628",
"Sec": 1950174
}
"
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) amperage of mains: 2300/3160/2450, amperage of charging station: 0/0/0 => available: 29700/28840/29550
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) Available max amperage: 29000
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) Available surplus: -1487.6200000000001
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) no charging calculated
2025-03-09 07:35:23.947 - debug: kecontact.0 (118391) not enough power for charging ...
2025-03-09 07:35:23.949 - debug: kecontact.0 (118391) set automatic.photovoltaics to false
2025-03-09 07:35:23.951 - info: kecontact.0 (118391) change pause status of wallbox from true to false
2025-03-09 07:35:23.951 - debug: kecontact.0 (118391) set automatic.pauseWallbox to false
2025-03-09 07:35:24.182 - debug: kecontact.0 (118391) Sent "curr 16000" to 192.168.5.25:7090
2025-03-09 07:35:24.183 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-ERR:X2 : not allowed now
"
2025-03-09 07:35:24.184 - error: kecontact.0 (118391) Error received from wallbox: TCH-ERR:X2 : not allowed now
2025-03-09 07:35:24.483 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:24.485 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51583,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950175
}
"
2025-03-09 07:35:24.485 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:24.784 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:24.786 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 6000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950175
}
"
2025-03-09 07:35:25.083 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:25.085 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51583,
"E total": 569513,
"Serial": "28345628",
"Sec": 1950175
}
"
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) amperage of mains: 2300/3160/2450, amperage of charging station: 0/0/0 => available: 29700/28840/29550
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) Available max amperage: 29000
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) Available surplus: -1487.6200000000001
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 16000
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:35:25.142 - debug: kecontact.0 (118391) wallbox set to charging maximum of 16000 mA
2025-03-09 07:35:25.142 - info: kecontact.0 (118391) (re)start charging with 16000mA (maxPower)
2025-03-09 07:35:25.302 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "TCH-OK :done
"
2025-03-09 07:35:25.303 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:25.336 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"Enable sys": 1}"
2025-03-09 07:35:25.336 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Enable sys": 1}"
2025-03-09 07:35:25.337 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:25.337 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:25.359 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Enable sys": 1}"
2025-03-09 07:35:25.384 - debug: kecontact.0 (118391) Sent "currtime 16000 1" to 192.168.5.25:7090
2025-03-09 07:35:25.385 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:25.386 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:25.437 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:25.684 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:25.686 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51583,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950176
}
"
2025-03-09 07:35:25.686 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:25.768 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "TCH-OK :done
"
2025-03-09 07:35:25.769 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:25.837 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:25.984 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:25.986 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 6000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950176
}
"
2025-03-09 07:35:26.159 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"Max curr": 16000}"
2025-03-09 07:35:26.160 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Max curr": 16000}"
2025-03-09 07:35:26.164 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:26.188 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Max curr": 16000}"
2025-03-09 07:35:26.233 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:26.284 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:26.285 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51583,
"E total": 569513,
"Serial": "28345628",
"Sec": 1950176
}
"
2025-03-09 07:35:26.339 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:26.339 - debug: kecontact.0 (118391) amperage of mains: 2300/3160/2450, amperage of charging station: 0/0/0 => available: 29700/28840/29550
2025-03-09 07:35:26.339 - debug: kecontact.0 (118391) Available max amperage: 29000
2025-03-09 07:35:26.339 - debug: kecontact.0 (118391) Available surplus: -1487.6200000000001
2025-03-09 07:35:26.409 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 1}"
2025-03-09 07:35:26.583 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:26.585 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51583,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950177
}
"
2025-03-09 07:35:26.585 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:27.255 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 16000}"
2025-03-09 07:35:29.456 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"State": 2}"
2025-03-09 07:35:29.456 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 2}"
2025-03-09 07:35:29.459 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:29.459 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 2}"
2025-03-09 07:35:29.589 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:29.829 - info: web.0 (59499) ==> Connected system.user.admin from ::ffff:192.168.5.225
2025-03-09 07:35:30.735 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 2}"
2025-03-09 07:35:31.257 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"State": 3}"
2025-03-09 07:35:31.257 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:31.258 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 3}"
2025-03-09 07:35:31.260 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 3}"
2025-03-09 07:35:31.329 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:34.034 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 3}"
2025-03-09 07:35:34.737 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:34.739 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950185
}
"
2025-03-09 07:35:35.038 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:35.040 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 230,
"U2": 0,
"U3": 0,
"I1": 1301,
"I2": 0,
"I3": 0,
"P": 23499,
"PF": 79,
"E pres": 51583,
"E total": 569513,
"Serial": "28345628",
"Sec": 1950185
}
"
2025-03-09 07:35:35.097 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:35.097 - debug: kecontact.0 (118391) amperage of mains: 2270/3050/2410, amperage of charging station: 1301/0/0 => available: 31031/28950/29590
2025-03-09 07:35:35.097 - debug: kecontact.0 (118391) Available max amperage: 29000
2025-03-09 07:35:35.097 - debug: kecontact.0 (118391) Available surplus: -1503.511
2025-03-09 07:35:35.338 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:35.339 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51584,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950186
}
"
2025-03-09 07:35:35.339 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:37.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817057
}
"
2025-03-09 07:35:37.638 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:37.705 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:37.937 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 226,
"U2": 228,
"U3": 232,
"I1": 10296,
"I2": 6,
"I3": 3,
"P": 2277342,
"PF": 976,
"E pres": 2920,
"E total": 76997566,
"Serial": "17405468",
"Sec": 817057
}
"
2025-03-09 07:35:37.937 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:38.005 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:38.110 - info: kecontact.1 (87235) vehicle (re)starts to charge
2025-03-09 07:35:38.237 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 2922,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817057
}
"
2025-03-09 07:35:38.238 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:38.305 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:41.622 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 2955}"
2025-03-09 07:35:41.623 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 2955}"
2025-03-09 07:35:41.624 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:41.643 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 2955}"
2025-03-09 07:35:41.705 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:46.647 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:46.649 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 221,
"U2": 0,
"U3": 0,
"I1": 14873,
"I2": 4,
"I3": 0,
"P": 3276933,
"PF": 996,
"E pres": 51655,
"E total": 569585,
"Serial": "28345628",
"Sec": 1950197
}
"
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) amperage of mains: 32659.999999999996/3170/2580, amperage of charging station: 14873/4/0 => available: 14213.000000000004/28834/29420
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) Available surplus: 1749.923
2025-03-09 07:35:46.714 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:35:46.714 - info: kecontact.0 (118391) stop charging
2025-03-09 07:35:46.947 - debug: kecontact.0 (118391) Sent "currtime 0 1" to 192.168.5.25:7090
2025-03-09 07:35:46.947 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:46.948 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:47.246 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:47.248 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 221,
"U2": 0,
"U3": 0,
"I1": 14865,
"I2": 4,
"I3": 0,
"P": 3274211,
"PF": 995,
"E pres": 51660,
"E total": 569590,
"Serial": "28345628",
"Sec": 1950197
}
"
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) amperage of mains: 32659.999999999996/3170/2580, amperage of charging station: 14865/4/0 => available: 14205.000000000004/28834/29420
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) Available surplus: -5091.058999999999
2025-03-09 07:35:47.308 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:35:47.308 - info: kecontact.0 (118391) stop charging
2025-03-09 07:35:47.547 - debug: kecontact.0 (118391) Sent "currtime 0 1" to 192.168.5.25:7090
2025-03-09 07:35:47.547 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:47.548 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:47.846 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:47.848 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 221,
"U2": 0,
"U3": 0,
"I1": 14858,
"I2": 5,
"I3": 0,
"P": 3274442,
"PF": 996,
"E pres": 51664,
"E total": 569594,
"Serial": "28345628",
"Sec": 1950198
}
"
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) amperage of mains: 32659.999999999996/3170/2580, amperage of charging station: 14858/5/0 => available: 14198.000000000004/28835/29420
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) Available surplus: -5090.827999999999
2025-03-09 07:35:47.908 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:35:47.908 - info: kecontact.0 (118391) stop charging
2025-03-09 07:35:48.147 - debug: kecontact.0 (118391) Sent "currtime 0 1" to 192.168.5.25:7090
2025-03-09 07:35:48.148 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:35:48.148 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:35:48.297 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 51670}"
2025-03-09 07:35:49.238 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 0}"
2025-03-09 07:35:49.239 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 5}"
2025-03-09 07:35:49.386 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 0}"
2025-03-09 07:35:49.738 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:35:49.739 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950200
}
"
2025-03-09 07:35:50.038 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:35:50.040 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 221,
"U2": 0,
"U3": 0,
"I1": 14834,
"I2": 4,
"I3": 0,
"P": 3264214,
"PF": 996,
"E pres": 51686,
"E total": 569616,
"Serial": "28345628",
"Sec": 1950200
}
"
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) amperage of mains: 32659.999999999996/3170/2580, amperage of charging station: 14834/4/0 => available: 14174.000000000004/28834/29420
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) Available surplus: -5101.055999999999
2025-03-09 07:35:50.102 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:35:50.339 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:35:50.340 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51688,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950201
}
"
2025-03-09 07:35:50.340 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:35:51.734 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3055}"
2025-03-09 07:35:51.735 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3055}"
2025-03-09 07:35:51.736 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:51.772 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3055}"
2025-03-09 07:35:51.817 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:52.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817072
}
"
2025-03-09 07:35:52.639 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:52.721 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:52.937 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 228,
"U3": 232,
"I1": 15730,
"I2": 7,
"I3": 4,
"P": 3530636,
"PF": 996,
"E pres": 3065,
"E total": 76997711,
"Serial": "17405468",
"Sec": 817072
}
"
2025-03-09 07:35:52.938 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:53.005 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:35:53.237 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3071,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817072
}
"
2025-03-09 07:35:53.238 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:35:53.305 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:01.943 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3156}"
2025-03-09 07:36:01.943 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3156}"
2025-03-09 07:36:01.944 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:01.947 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3156}"
2025-03-09 07:36:02.025 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:04.738 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:36:04.740 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950215
}
"
2025-03-09 07:36:05.037 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:05.039 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51691,
"E total": 569621,
"Serial": "28345628",
"Sec": 1950215
}
"
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) amperage of mains: 17530/3210/2440, amperage of charging station: 0/0/0 => available: 14470/28790/29560
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) Available surplus: -5023.01
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:36:05.097 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:36:05.097 - info: kecontact.0 (118391) (re)start charging with 14500mA (maxPower)
2025-03-09 07:36:05.338 - debug: kecontact.0 (118391) Sent "currtime 14500 1" to 192.168.5.25:7090
2025-03-09 07:36:05.339 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:36:05.339 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:36:05.638 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:36:05.640 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51691,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950216
}
"
2025-03-09 07:36:05.641 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:36:06.371 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 1}"
2025-03-09 07:36:06.525 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 14500}"
2025-03-09 07:36:07.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817087
}
"
2025-03-09 07:36:07.638 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:07.717 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:07.937 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 230,
"U3": 230,
"I1": 15769,
"I2": 6,
"I3": 3,
"P": 3531123,
"PF": 996,
"E pres": 3212,
"E total": 76997858,
"Serial": "17405468",
"Sec": 817087
}
"
2025-03-09 07:36:07.938 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:08.017 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:08.237 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3215,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817087
}
"
2025-03-09 07:36:08.238 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:08.313 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:10.664 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 2}"
2025-03-09 07:36:12.180 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3256}"
2025-03-09 07:36:12.180 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3256}"
2025-03-09 07:36:12.181 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:12.184 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3256}"
2025-03-09 07:36:12.257 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:13.912 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 3}"
2025-03-09 07:36:19.738 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:36:19.741 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950230
}
"
2025-03-09 07:36:20.037 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:20.039 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 225,
"U2": 0,
"U3": 2,
"I1": 1213,
"I2": 0,
"I3": 0,
"P": 53305,
"PF": 191,
"E pres": 51694,
"E total": 569624,
"Serial": "28345628",
"Sec": 1950230
}
"
2025-03-09 07:36:20.100 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:20.100 - debug: kecontact.0 (118391) amperage of mains: 17780/3150/2550, amperage of charging station: 1213/0/0 => available: 15433/28850/29450
2025-03-09 07:36:20.100 - debug: kecontact.0 (118391) Available max amperage: 15500
2025-03-09 07:36:20.100 - debug: kecontact.0 (118391) Available surplus: -4986.195
2025-03-09 07:36:20.338 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:36:20.339 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51694,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950231
}
"
2025-03-09 07:36:20.340 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:36:22.480 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3356}"
2025-03-09 07:36:22.481 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3356}"
2025-03-09 07:36:22.481 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:22.484 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3356}"
2025-03-09 07:36:22.565 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:22.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817102
}
"
2025-03-09 07:36:22.639 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:22.713 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:22.936 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 220,
"U2": 230,
"U3": 230,
"I1": 16077,
"I2": 6,
"I3": 4,
"P": 3533600,
"PF": 996,
"E pres": 3359,
"E total": 76998005,
"Serial": "17405468",
"Sec": 817102
}
"
2025-03-09 07:36:22.937 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:23.013 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:23.237 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3362,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817102
}
"
2025-03-09 07:36:23.238 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:23.317 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:30.177 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 51771}"
2025-03-09 07:36:31.647 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:31.648 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13328,
"I2": 3,
"I3": 0,
"P": 2913389,
"PF": 994,
"E pres": 51782,
"E total": 569712,
"Serial": "28345628",
"Sec": 1950242
}
"
2025-03-09 07:36:31.711 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:31.711 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) amperage of mains: 31120/3160/2550, amperage of charging station: 13328/3/0 => available: 14208/28843/29450
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) Available surplus: -2126.111
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14000
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:36:31.712 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14000 mA
2025-03-09 07:36:31.712 - info: kecontact.0 (118391) regulate wallbox from 14500 to 14000mA (maxPower)
2025-03-09 07:36:31.946 - debug: kecontact.0 (118391) Sent "currtime 14000 1" to 192.168.5.25:7090
2025-03-09 07:36:31.948 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:36:31.948 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:36:32.247 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:32.249 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13343,
"I2": 4,
"I3": 0,
"P": 2909197,
"PF": 995,
"E pres": 51787,
"E total": 569717,
"Serial": "28345628",
"Sec": 1950242
}
"
2025-03-09 07:36:32.303 - info: kecontact.0 (118391) vehicle (re)starts to charge
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) amperage of mains: 31120/3160/2550, amperage of charging station: 13343/4/0 => available: 14223/28844/29450
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) Available surplus: -5091.203
2025-03-09 07:36:32.303 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:36:32.303 - info: kecontact.0 (118391) stop charging
2025-03-09 07:36:32.547 - debug: kecontact.0 (118391) Sent "currtime 0 1" to 192.168.5.25:7090
2025-03-09 07:36:32.549 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:36:32.549 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:36:32.763 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3456}"
2025-03-09 07:36:32.763 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3456}"
2025-03-09 07:36:32.764 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:32.833 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:32.843 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3456}"
2025-03-09 07:36:32.848 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:32.850 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13345,
"I2": 4,
"I3": 0,
"P": 2910230,
"PF": 995,
"E pres": 51792,
"E total": 569722,
"Serial": "28345628",
"Sec": 1950243
}
"
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) amperage of mains: 31120/3160/2550, amperage of charging station: 13345/4/0 => available: 14225/28844/29450
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) Available surplus: -5090.17
2025-03-09 07:36:32.904 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:36:32.904 - info: kecontact.0 (118391) stop charging
2025-03-09 07:36:33.149 - debug: kecontact.0 (118391) Sent "currtime 0 1" to 192.168.5.25:7090
2025-03-09 07:36:33.150 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:36:33.150 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:36:34.214 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 0}"
2025-03-09 07:36:34.218 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 5}"
2025-03-09 07:36:34.300 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 0}"
2025-03-09 07:36:34.739 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:36:34.743 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950245
}
"
2025-03-09 07:36:35.039 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:35.041 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13351,
"I2": 3,
"I3": 0,
"P": 2917614,
"PF": 995,
"E pres": 51810,
"E total": 569740,
"Serial": "28345628",
"Sec": 1950245
}
"
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) amperage of mains: 31120/3160/2550, amperage of charging station: 13351/3/0 => available: 14231/28843/29450
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) Available max amperage: 14000
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) Available surplus: -5082.786
2025-03-09 07:36:35.095 - debug: kecontact.0 (118391) set intermediate charging maximum of 0 mA
2025-03-09 07:36:35.339 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:36:35.341 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51811,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950246
}
"
2025-03-09 07:36:35.341 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:36:37.637 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817117
}
"
2025-03-09 07:36:37.639 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:37.721 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:37.936 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 229,
"U3": 229,
"I1": 15818,
"I2": 7,
"I3": 3,
"P": 3530205,
"PF": 996,
"E pres": 3507,
"E total": 76998153,
"Serial": "17405468",
"Sec": 817117
}
"
2025-03-09 07:36:37.937 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:38.017 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:38.238 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3510,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817117
}
"
2025-03-09 07:36:38.239 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:38.317 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:42.621 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3554}"
2025-03-09 07:36:42.622 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3554}"
2025-03-09 07:36:42.622 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:42.701 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:42.775 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3554}"
2025-03-09 07:36:49.739 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:36:49.740 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950260
}
"
2025-03-09 07:36:50.038 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:36:50.040 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51812,
"E total": 569742,
"Serial": "28345628",
"Sec": 1950260
}
"
2025-03-09 07:36:50.096 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:36:50.096 - debug: kecontact.0 (118391) amperage of mains: 17600/3060/2480, amperage of charging station: 0/0/0 => available: 14400/28940/29520
2025-03-09 07:36:50.096 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:36:50.096 - debug: kecontact.0 (118391) Available surplus: -4995.3
2025-03-09 07:36:50.338 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:36:50.340 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51812,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950261
}
"
2025-03-09 07:36:50.340 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:36:51.854 - info: fronius.0 (121228) The current system configuration is not up to date. Settings are updated and adapter restarted!
2025-03-09 07:36:51.865 - info: host.raspberrypi stopInstance system.adapter.fronius.0 (force=false, process=true)
2025-03-09 07:36:51.868 - info: fronius.0 (121228) Got terminate signal TERMINATE_YOURSELF
2025-03-09 07:36:51.921 - info: host.raspberrypi stopInstance system.adapter.fronius.0 send kill signal
2025-03-09 07:36:52.369 - info: fronius.0 (121228) terminating
2025-03-09 07:36:52.370 - info: fronius.0 (121228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-03-09 07:36:52.638 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817132
}
"
2025-03-09 07:36:52.640 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:52.717 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:52.920 - info: host.raspberrypi instance system.adapter.fronius.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-03-09 07:36:52.936 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 224,
"U2": 230,
"U3": 231,
"I1": 15787,
"I2": 7,
"I3": 4,
"P": 3534365,
"PF": 996,
"E pres": 3654,
"E total": 76998300,
"Serial": "17405468",
"Sec": 817132
}
"
2025-03-09 07:36:52.937 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:52.942 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3654}"
2025-03-09 07:36:52.943 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3654}"
2025-03-09 07:36:52.949 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:53.015 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3654}"
2025-03-09 07:36:53.037 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:53.081 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:53.238 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3657,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817132
}
"
2025-03-09 07:36:53.238 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:36:53.305 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:36:56.295 - info: host.raspberrypi instance system.adapter.fronius.0 in version "2.1.1" started with pid 121419
2025-03-09 07:36:57.039 - info: fronius.0 (121419) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.fronius, node: v20.18.3, js-controller: 7.0.6
2025-03-09 07:37:03.084 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3754}"
2025-03-09 07:37:03.085 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3754}"
2025-03-09 07:37:03.086 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:03.154 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3754}"
2025-03-09 07:37:03.165 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:04.740 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:37:04.742 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950275
}
"
2025-03-09 07:37:05.040 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:05.041 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 51812,
"E total": 569742,
"Serial": "28345628",
"Sec": 1950275
}
"
2025-03-09 07:37:05.101 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:05.101 - debug: kecontact.0 (118391) amperage of mains: 17510/3120/2450, amperage of charging station: 0/0/0 => available: 14490/28880/29550
2025-03-09 07:37:05.101 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:05.102 - debug: kecontact.0 (118391) Available surplus: -4977.7
2025-03-09 07:37:05.102 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:37:05.102 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:37:05.102 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:37:05.102 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:37:05.102 - info: kecontact.0 (118391) (re)start charging with 14500mA (maxPower)
2025-03-09 07:37:05.340 - debug: kecontact.0 (118391) Sent "currtime 14500 1" to 192.168.5.25:7090
2025-03-09 07:37:05.341 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:37:05.341 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:37:05.640 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:37:05.641 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51812,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950276
}
"
2025-03-09 07:37:05.642 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:37:06.347 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 1}"
2025-03-09 07:37:07.285 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 14500}"
2025-03-09 07:37:07.639 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817147
}
"
2025-03-09 07:37:07.642 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:07.721 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:07.940 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 222,
"U2": 230,
"U3": 231,
"I1": 15900,
"I2": 7,
"I3": 3,
"P": 3533782,
"PF": 996,
"E pres": 3801,
"E total": 76998447,
"Serial": "17405468",
"Sec": 817147
}
"
2025-03-09 07:37:07.941 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:08.021 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:08.239 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3801,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817147
}
"
2025-03-09 07:37:08.240 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:08.325 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:10.765 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 2}"
2025-03-09 07:37:13.277 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3854}"
2025-03-09 07:37:13.278 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3854}"
2025-03-09 07:37:13.279 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:13.279 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3854}"
2025-03-09 07:37:13.349 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:14.073 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 3}"
2025-03-09 07:37:19.740 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:37:19.742 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950290
}
"
2025-03-09 07:37:20.041 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:20.043 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13922,
"I2": 4,
"I3": 0,
"P": 3023223,
"PF": 996,
"E pres": 51823,
"E total": 569753,
"Serial": "28345628",
"Sec": 1950290
}
"
2025-03-09 07:37:20.114 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:20.114 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:20.114 - debug: kecontact.0 (118391) amperage of mains: 17710/3030/2460, amperage of charging station: 13922/4/0 => available: 28212/28974/29540
2025-03-09 07:37:20.114 - debug: kecontact.0 (118391) Available max amperage: 28000
2025-03-09 07:37:20.114 - debug: kecontact.0 (118391) Available surplus: -1933.4470000000001
2025-03-09 07:37:20.342 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:37:20.344 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51827,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950291
}
"
2025-03-09 07:37:20.344 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:37:22.640 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817162
}
"
2025-03-09 07:37:22.643 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:22.725 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:22.940 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 218,
"U2": 233,
"U3": 231,
"I1": 16180,
"I2": 5,
"I3": 4,
"P": 3535673,
"PF": 996,
"E pres": 3948,
"E total": 76998594,
"Serial": "17405468",
"Sec": 817162
}
"
2025-03-09 07:37:22.940 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:23.017 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:23.240 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 3952,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817162
}
"
2025-03-09 07:37:23.241 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:23.321 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:23.577 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 3955}"
2025-03-09 07:37:23.577 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3955}"
2025-03-09 07:37:23.580 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:23.583 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 3955}"
2025-03-09 07:37:23.769 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:25.729 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 51871}"
2025-03-09 07:37:29.451 - info: web.0 (59499) <== Disconnect system.user.admin from ::ffff:192.168.5.225
2025-03-09 07:37:31.661 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:31.662 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13331,
"I2": 4,
"I3": 0,
"P": 2905132,
"PF": 994,
"E pres": 51918,
"E total": 569848,
"Serial": "28345628",
"Sec": 1950302
}
"
2025-03-09 07:37:31.720 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:31.720 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) amperage of mains: 30980/3140/2430, amperage of charging station: 13331/4/0 => available: 14351/28864/29570
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) Available surplus: -2051.538
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:37:31.721 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:37:31.961 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:31.962 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13344,
"I2": 4,
"I3": 0,
"P": 2904156,
"PF": 995,
"E pres": 51920,
"E total": 569850,
"Serial": "28345628",
"Sec": 1950302
}
"
2025-03-09 07:37:32.023 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:32.023 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:32.023 - debug: kecontact.0 (118391) amperage of mains: 30980/3140/2430, amperage of charging station: 13344/4/0 => available: 14364/28864/29570
2025-03-09 07:37:32.023 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:32.023 - debug: kecontact.0 (118391) Available surplus: -4984.184
2025-03-09 07:37:32.261 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:32.262 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13325,
"I2": 3,
"I3": 0,
"P": 2903315,
"PF": 994,
"E pres": 51923,
"E total": 569853,
"Serial": "28345628",
"Sec": 1950302
}
"
2025-03-09 07:37:32.320 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:32.320 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:32.320 - debug: kecontact.0 (118391) amperage of mains: 30980/3140/2430, amperage of charging station: 13325/3/0 => available: 14345/28863/29570
2025-03-09 07:37:32.320 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:32.320 - debug: kecontact.0 (118391) Available surplus: -4985.025
2025-03-09 07:37:33.728 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4055}"
2025-03-09 07:37:33.728 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4055}"
2025-03-09 07:37:33.729 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:33.770 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4055}"
2025-03-09 07:37:33.809 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:34.742 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:37:34.743 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950305
}
"
2025-03-09 07:37:35.042 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:35.043 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 219,
"U2": 0,
"U3": 0,
"I1": 13345,
"I2": 3,
"I3": 0,
"P": 2910860,
"PF": 994,
"E pres": 51944,
"E total": 569874,
"Serial": "28345628",
"Sec": 1950305
}
"
2025-03-09 07:37:35.101 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:35.101 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:35.101 - debug: kecontact.0 (118391) amperage of mains: 30980/3140/2430, amperage of charging station: 13345/3/0 => available: 14365/28863/29570
2025-03-09 07:37:35.101 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:35.101 - debug: kecontact.0 (118391) Available surplus: -4977.48
2025-03-09 07:37:35.341 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:37:35.344 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 51948,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950306
}
"
2025-03-09 07:37:35.344 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:37:37.641 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817177
}
"
2025-03-09 07:37:37.643 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:37.713 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:37.941 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 218,
"U2": 232,
"U3": 232,
"I1": 16181,
"I2": 7,
"I3": 4,
"P": 3536910,
"PF": 996,
"E pres": 4096,
"E total": 76998742,
"Serial": "17405468",
"Sec": 817177
}
"
2025-03-09 07:37:37.942 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:38.009 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:38.016 - info: web.0 (59499) ==> Connected system.user.admin from ::ffff:192.168.5.225
2025-03-09 07:37:38.098 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 51971}"
2025-03-09 07:37:38.241 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4096,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817177
}
"
2025-03-09 07:37:38.242 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:38.309 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:44.047 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4156}"
2025-03-09 07:37:44.047 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4156}"
2025-03-09 07:37:44.048 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:44.051 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4156}"
2025-03-09 07:37:44.117 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:49.742 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:37:49.743 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950320
}
"
2025-03-09 07:37:50.042 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:37:50.043 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13327,
"I2": 3,
"I3": 0,
"P": 2907636,
"PF": 994,
"E pres": 52067,
"E total": 569997,
"Serial": "28345628",
"Sec": 1950320
}
"
2025-03-09 07:37:50.105 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:37:50.106 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:37:50.106 - debug: kecontact.0 (118391) amperage of mains: 30990/3040/2390, amperage of charging station: 13327/3/0 => available: 14337/28963/29610
2025-03-09 07:37:50.106 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:37:50.106 - debug: kecontact.0 (118391) Available surplus: -4952.4439999999995
2025-03-09 07:37:50.342 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:37:50.344 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52069,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950321
}
"
2025-03-09 07:37:50.344 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:37:50.467 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52071}"
2025-03-09 07:37:52.642 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817192
}
"
2025-03-09 07:37:52.645 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:52.725 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:52.941 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 218,
"U2": 231,
"U3": 232,
"I1": 16215,
"I2": 6,
"I3": 4,
"P": 3538476,
"PF": 997,
"E pres": 4240,
"E total": 76998886,
"Serial": "17405468",
"Sec": 817192
}
"
2025-03-09 07:37:52.942 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:53.021 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:53.242 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4243,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817192
}
"
2025-03-09 07:37:53.243 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:53.321 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:37:54.224 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4256}"
2025-03-09 07:37:54.224 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4256}"
2025-03-09 07:37:54.225 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:37:54.229 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4256}"
2025-03-09 07:37:54.305 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:02.836 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52171}"
2025-03-09 07:38:04.567 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4356}"
2025-03-09 07:38:04.567 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4356}"
2025-03-09 07:38:04.569 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:04.593 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4356}"
2025-03-09 07:38:04.653 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:04.742 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:38:04.745 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950335
}
"
2025-03-09 07:38:05.042 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:38:05.043 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13348,
"I2": 4,
"I3": 0,
"P": 2903360,
"PF": 994,
"E pres": 52188,
"E total": 570118,
"Serial": "28345628",
"Sec": 1950335
}
"
2025-03-09 07:38:05.106 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:38:05.106 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) amperage of mains: 31000/3110/2400, amperage of charging station: 13348/4/0 => available: 14348/28894/29600
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) Available surplus: -4997.779999999999
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:38:05.107 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:38:05.342 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:38:05.344 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52190,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950336
}
"
2025-03-09 07:38:05.344 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:38:07.643 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817207
}
"
2025-03-09 07:38:07.645 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:07.725 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:07.941 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 218,
"U2": 231,
"U3": 232,
"I1": 16214,
"I2": 6,
"I3": 3,
"P": 3538685,
"PF": 996,
"E pres": 4391,
"E total": 76999037,
"Serial": "17405468",
"Sec": 817207
}
"
2025-03-09 07:38:07.942 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:08.017 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:08.243 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4391,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817207
}
"
2025-03-09 07:38:08.244 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:08.325 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:14.323 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4454}"
2025-03-09 07:38:14.323 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4454}"
2025-03-09 07:38:14.324 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:14.401 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:14.423 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4454}"
2025-03-09 07:38:15.205 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52270}"
2025-03-09 07:38:19.743 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:38:19.745 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950350
}
"
2025-03-09 07:38:20.043 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:38:20.045 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13364,
"I2": 4,
"I3": 0,
"P": 2913942,
"PF": 995,
"E pres": 52309,
"E total": 570239,
"Serial": "28345628",
"Sec": 1950350
}
"
2025-03-09 07:38:20.112 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:38:20.112 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:38:20.112 - debug: kecontact.0 (118391) amperage of mains: 30980/3200/2390, amperage of charging station: 13364/4/0 => available: 14384/28804/29610
2025-03-09 07:38:20.112 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:38:20.112 - debug: kecontact.0 (118391) Available surplus: -4967.718
2025-03-09 07:38:20.343 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:38:20.345 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52311,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950351
}
"
2025-03-09 07:38:20.345 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:38:22.643 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817222
}
"
2025-03-09 07:38:22.646 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:22.725 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:22.942 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 218,
"U2": 232,
"U3": 232,
"I1": 16192,
"I2": 7,
"I3": 4,
"P": 3537446,
"PF": 996,
"E pres": 4535,
"E total": 76999181,
"Serial": "17405468",
"Sec": 817222
}
"
2025-03-09 07:38:22.943 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:23.021 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:23.243 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4542,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817222
}
"
2025-03-09 07:38:23.244 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:23.321 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:24.598 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4554}"
2025-03-09 07:38:24.599 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4554}"
2025-03-09 07:38:24.599 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:24.664 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4554}"
2025-03-09 07:38:24.665 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:27.574 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52371}"
2025-03-09 07:38:34.745 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:38:34.747 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 0,
"Serial": "28345628",
"Sec": 1950365
}
"
2025-03-09 07:38:34.851 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4655}"
2025-03-09 07:38:34.852 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4655}"
2025-03-09 07:38:34.864 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:34.898 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4655}"
2025-03-09 07:38:34.899 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:35.044 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:38:35.046 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 218,
"U2": 0,
"U3": 0,
"I1": 13373,
"I2": 4,
"I3": 0,
"P": 2910256,
"PF": 994,
"E pres": 52430,
"E total": 570360,
"Serial": "28345628",
"Sec": 1950365
}
"
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) wallbox is charging with 1 phase
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) amperage of mains: 30940/3140/2360, amperage of charging station: 13373/4/0 => available: 14433/28864/29640
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) Available surplus: -4948.044
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:38:35.102 - info: kecontact.0 (118391) updating X2 for switch of phases from 0 to 1...
2025-03-09 07:38:35.102 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:38:35.344 - debug: kecontact.0 (118391) Sent "x2 1" to 192.168.5.25:7090
2025-03-09 07:38:35.346 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:38:35.346 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:38:35.375 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 0}"
2025-03-09 07:38:35.377 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 5}"
2025-03-09 07:38:35.393 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 0}"
2025-03-09 07:38:35.644 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:38:35.647 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52435,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950366
}
"
2025-03-09 07:38:35.647 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:38:37.645 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817237
}
"
2025-03-09 07:38:37.647 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:37.713 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:37.945 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 221,
"U2": 232,
"U3": 231,
"I1": 15970,
"I2": 6,
"I3": 4,
"P": 3535733,
"PF": 996,
"E pres": 4683,
"E total": 76999329,
"Serial": "17405468",
"Sec": 817237
}
"
2025-03-09 07:38:37.945 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:38.009 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:38.246 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4686,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817237
}
"
2025-03-09 07:38:38.247 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:38.317 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:41.909 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Enable sys": 1}"
2025-03-09 07:38:43.367 - info: web.0 (59499) <== Disconnect system.user.admin from ::ffff:192.168.5.225
2025-03-09 07:38:44.075 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 14500}"
2025-03-09 07:38:45.165 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4755}"
2025-03-09 07:38:45.166 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4755}"
2025-03-09 07:38:45.166 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:45.245 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:45.246 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4755}"
2025-03-09 07:38:47.547 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 2}"
2025-03-09 07:38:49.745 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:38:49.747 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 2,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950380
}
"
2025-03-09 07:38:50.045 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:38:50.046 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 223,
"U2": 231,
"U3": 231,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 52445,
"E total": 570375,
"Serial": "28345628",
"Sec": 1950380
}
"
2025-03-09 07:38:50.111 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:38:50.111 - debug: kecontact.0 (118391) amperage of mains: 17400/3020/2340, amperage of charging station: 0/0/0 => available: 14600/28980/29660
2025-03-09 07:38:50.112 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:38:50.112 - debug: kecontact.0 (118391) Available surplus: -4878.7
2025-03-09 07:38:50.345 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:38:50.347 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52445,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950381
}
"
2025-03-09 07:38:50.347 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:38:51.458 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"State": 3}"
2025-03-09 07:38:52.646 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817252
}
"
2025-03-09 07:38:52.649 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:52.725 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:52.946 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 223,
"U2": 232,
"U3": 231,
"I1": 15876,
"I2": 7,
"I3": 4,
"P": 3532949,
"PF": 996,
"E pres": 4830,
"E total": 76999476,
"Serial": "17405468",
"Sec": 817252
}
"
2025-03-09 07:38:52.947 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:53.025 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:53.247 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4833,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817252
}
"
2025-03-09 07:38:53.248 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:53.325 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:55.419 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4855}"
2025-03-09 07:38:55.420 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4855}"
2025-03-09 07:38:55.421 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:38:55.424 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4855}"
2025-03-09 07:38:55.497 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:38:57.520 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52471}"
2025-03-09 07:39:01.426 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52575}"
2025-03-09 07:39:01.650 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:01.651 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14287,
"I2": 14212,
"I3": 14204,
"P": 9646370,
"PF": 999,
"E pres": 52580,
"E total": 570510,
"Serial": "28345628",
"Sec": 1950392
}
"
2025-03-09 07:39:01.718 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:01.718 - debug: kecontact.0 (118391) amperage of mains: 31910/16800/16180, amperage of charging station: 14287/14212/14204 => available: 14377/29412/30024
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) Available surplus: 4767.670000000001
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:39:01.719 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:39:01.949 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:01.951 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14298,
"I2": 14222,
"I3": 14229,
"P": 9658505,
"PF": 999,
"E pres": 52586,
"E total": 570516,
"Serial": "28345628",
"Sec": 1950392
}
"
2025-03-09 07:39:02.017 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:02.018 - debug: kecontact.0 (118391) amperage of mains: 31910/16800/16180, amperage of charging station: 14298/14222/14229 => available: 14388/29422/30049
2025-03-09 07:39:02.018 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:02.018 - debug: kecontact.0 (118391) Available surplus: -4984.125000000002
2025-03-09 07:39:02.249 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:02.251 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14323,
"I2": 14243,
"I3": 14235,
"P": 9670262,
"PF": 999,
"E pres": 52592,
"E total": 570522,
"Serial": "28345628",
"Sec": 1950392
}
"
2025-03-09 07:39:02.312 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:02.312 - debug: kecontact.0 (118391) amperage of mains: 31910/16800/16180, amperage of charging station: 14323/14243/14235 => available: 14413/29443/30055
2025-03-09 07:39:02.312 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:02.312 - debug: kecontact.0 (118391) Available surplus: -4972.368
2025-03-09 07:39:04.746 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:39:04.749 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950395
}
"
2025-03-09 07:39:05.047 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:05.048 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14349,
"I2": 14271,
"I3": 14256,
"P": 9678660,
"PF": 999,
"E pres": 52669,
"E total": 570599,
"Serial": "28345628",
"Sec": 1950395
}
"
2025-03-09 07:39:05.107 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:05.108 - debug: kecontact.0 (118391) amperage of mains: 31910/16800/16180, amperage of charging station: 14349/14271/14256 => available: 14439/29471/30076
2025-03-09 07:39:05.108 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:05.108 - debug: kecontact.0 (118391) Available surplus: -4963.970000000001
2025-03-09 07:39:05.114 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52673}"
2025-03-09 07:39:05.346 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:39:05.349 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 52679,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950396
}
"
2025-03-09 07:39:05.349 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:39:05.523 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 4956}"
2025-03-09 07:39:05.523 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4956}"
2025-03-09 07:39:05.524 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:05.601 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:05.624 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 4956}"
2025-03-09 07:39:07.647 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817267
}
"
2025-03-09 07:39:07.648 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:07.676 - info: web.0 (59499) ==> Connected system.user.admin from ::ffff:192.168.5.225
2025-03-09 07:39:07.717 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:07.947 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 220,
"U2": 228,
"U3": 229,
"I1": 16071,
"I2": 6,
"I3": 4,
"P": 3536412,
"PF": 996,
"E pres": 4978,
"E total": 76999624,
"Serial": "17405468",
"Sec": 817267
}
"
2025-03-09 07:39:07.948 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:08.017 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:08.247 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 4981,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817267
}
"
2025-03-09 07:39:08.248 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:08.329 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:08.803 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52773}"
2025-03-09 07:39:12.492 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52871}"
2025-03-09 07:39:15.803 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 5056}"
2025-03-09 07:39:15.803 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:15.804 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5056}"
2025-03-09 07:39:15.865 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5056}"
2025-03-09 07:39:15.869 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:16.182 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 52971}"
2025-03-09 07:39:19.747 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:39:19.749 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950410
}
"
2025-03-09 07:39:19.870 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53070}"
2025-03-09 07:39:20.046 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:20.049 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14273,
"I2": 14207,
"I3": 14189,
"P": 9638608,
"PF": 999,
"E pres": 53070,
"E total": 571000,
"Serial": "28345628",
"Sec": 1950410
}
"
2025-03-09 07:39:20.112 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:20.112 - debug: kecontact.0 (118391) amperage of mains: 31850/16680/16120.000000000002, amperage of charging station: 14273/14207/14189 => available: 14423/29527/30069
2025-03-09 07:39:20.112 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:20.113 - debug: kecontact.0 (118391) Available surplus: -4953.482
2025-03-09 07:39:20.346 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:39:20.349 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 53082,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950411
}
"
2025-03-09 07:39:20.349 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:39:22.647 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817282
}
"
2025-03-09 07:39:22.651 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:22.729 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:22.947 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 220,
"U2": 228,
"U3": 229,
"I1": 16062,
"I2": 6,
"I3": 3,
"P": 3532758,
"PF": 996,
"E pres": 5125,
"E total": 76999771,
"Serial": "17405468",
"Sec": 817282
}
"
2025-03-09 07:39:22.948 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:23.029 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:23.248 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 5128,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817282
}
"
2025-03-09 07:39:23.249 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:23.329 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:23.776 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53174}"
2025-03-09 07:39:26.022 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 5156}"
2025-03-09 07:39:26.022 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5156}"
2025-03-09 07:39:26.023 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:26.089 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:26.104 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5156}"
2025-03-09 07:39:27.465 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53273}"
2025-03-09 07:39:31.154 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53372}"
2025-03-09 07:39:34.748 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:39:34.750 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950425
}
"
2025-03-09 07:39:34.843 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53470}"
2025-03-09 07:39:35.047 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:35.049 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 227,
"U3": 229,
"I1": 14282,
"I2": 14218,
"I3": 14209,
"P": 9649645,
"PF": 999,
"E pres": 53470,
"E total": 571400,
"Serial": "28345628",
"Sec": 1950425
}
"
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) amperage of mains: 31860/16620/16140, amperage of charging station: 14282/14218/14209 => available: 14422/29598/30069
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) Available surplus: -4926.385
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) pvAutomaticsActive: false, vehicleIsPlugged: true
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) new current due to vehicle not plugged or pv automatics not active is 14500
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) wait for minimum time for phase switch to 3p
2025-03-09 07:39:35.106 - debug: kecontact.0 (118391) wallbox set to charging maximum of 14500 mA
2025-03-09 07:39:35.347 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:39:35.350 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 53482,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950426
}
"
2025-03-09 07:39:35.350 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:39:35.900 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 5254}"
2025-03-09 07:39:35.901 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:35.901 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5254}"
2025-03-09 07:39:35.935 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5254}"
2025-03-09 07:39:35.969 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:37.650 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817297
}
"
2025-03-09 07:39:37.949 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 220,
"U2": 228,
"U3": 229,
"I1": 16065,
"I2": 6,
"I3": 4,
"P": 3534469,
"PF": 996,
"E pres": 5272,
"E total": 76999918,
"Serial": "17405468",
"Sec": 817297
}
"
2025-03-09 07:39:38.078 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:38.078 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:38.249 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 5275,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817297
}
"
2025-03-09 07:39:38.283 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:38.336 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:38.337 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:38.389 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:38.532 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53570}"
2025-03-09 07:39:39.817 - info: kecontact.0 (118391) change of photovoltaics automatic from false to true
2025-03-09 07:39:39.817 - debug: kecontact.0 (118391) set automatic.photovoltaics to true
2025-03-09 07:39:39.817 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:39:39.819 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 14500,
"Max curr %": 241,
"Curr HW": 16000,
"Curr user": 14500,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 14500,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950430
}
"
2025-03-09 07:39:40.117 - debug: kecontact.0 (118391) Sent "display 0 0 0 0 PV-optimiertes$Laden" to 192.168.5.25:7090
2025-03-09 07:39:40.129 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:39:40.129 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:39:40.418 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:40.419 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 220,
"U2": 228,
"U3": 229,
"I1": 14282,
"I2": 14203,
"I3": 14187,
"P": 9646755,
"PF": 999,
"E pres": 53616,
"E total": 571546,
"Serial": "28345628",
"Sec": 1950431
}
"
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) amperage of mains: 31860/16620/16140, amperage of charging station: 14282/14203/14187 => available: 14422/29583/30047
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) Available max amperage: 14500
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) Available surplus: -4929.2750000000015
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) pvAutomaticsActive: true, vehicleIsPlugged: true
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) power: -4929.2750000000015 / voltage: 230 * 1000 / delta: 500 / phases: 3 * delta = -7143.876811594205
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) first calculation for current is -7000
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) power: -4929.2750000000015 / voltage: 230 * 1000 / delta: 500 / phases: 1 * delta = -21431.630434782615
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) no switching to 1 phase because of minimum charging time: Sun Mar 09 2025 07:36:32 GMT+0100 (Mitteleuropäische Normalzeit)
2025-03-09 07:39:40.481 - info: kecontact.0 (118391) minimum charge time of 300sec not reached, continuing charging session. Sun Mar 09 2025 07:36:32 GMT+0100 (Mitteleuropäische Normalzeit)
2025-03-09 07:39:40.481 - debug: kecontact.0 (118391) wallbox set to charging maximum of 6000 mA
2025-03-09 07:39:40.481 - info: kecontact.0 (118391) regulate wallbox from 14500 to 6000mA
2025-03-09 07:39:40.719 - debug: kecontact.0 (118391) Sent "currtime 6000 1" to 192.168.5.25:7090
2025-03-09 07:39:40.721 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "TCH-OK :done
"
2025-03-09 07:39:40.721 - debug: kecontact.0 (118391) Received TCH-OK :done
2025-03-09 07:39:41.019 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:39:41.022 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 53633,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950431
}
"
2025-03-09 07:39:41.022 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:39:42.438 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53674}"
2025-03-09 07:39:44.902 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "TCH-OK :done
"
2025-03-09 07:39:44.903 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:44.960 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"Enable sys": 0}"
2025-03-09 07:39:44.960 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Enable sys": 0}"
2025-03-09 07:39:44.961 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"State": 5}"
2025-03-09 07:39:44.961 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:44.961 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:44.962 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:44.963 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 5}"
2025-03-09 07:39:44.964 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"Max curr": 0}"
2025-03-09 07:39:44.978 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Max curr": 0}"
2025-03-09 07:39:45.020 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:45.048 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Enable sys": 0}"
2025-03-09 07:39:45.049 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"State": 5}"
2025-03-09 07:39:45.058 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"Max curr": 0}"
2025-03-09 07:39:45.074 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:45.076 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:45.077 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:45.410 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "TCH-OK :done
"
2025-03-09 07:39:45.411 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:45.476 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:46.127 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53773}"
2025-03-09 07:39:46.470 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{"E pres": 5354}"
2025-03-09 07:39:46.470 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5354}"
2025-03-09 07:39:46.471 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:46.537 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:46.585 - debug: kecontact.0 (118391) UDP broadcast datagram from 192.168.5.24:7090: "{"E pres": 5354}"
2025-03-09 07:39:47.429 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"Max curr": 6000}"
2025-03-09 07:39:49.748 - debug: kecontact.0 (118391) Sent "report 2" to 192.168.5.25:7090
2025-03-09 07:39:49.750 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 6000,
"Max curr %": 100,
"Curr HW": 16000,
"Curr user": 6000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 6000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 1,
"Input": 1,
"X2 phaseSwitch source": 4,
"X2 phaseSwitch": 1,
"Serial": "28345628",
"Sec": 1950440
}
"
2025-03-09 07:39:50.049 - debug: kecontact.0 (118391) Sent "report 3" to 192.168.5.25:7090
2025-03-09 07:39:50.050 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "3",
"U1": 226,
"U2": 228,
"U3": 230,
"I1": 5927,
"I2": 5900,
"I3": 5913,
"P": 4042956,
"PF": 996,
"E pres": 53852,
"E total": 571782,
"Serial": "28345628",
"Sec": 1950440
}
"
2025-03-09 07:39:50.113 - debug: kecontact.0 (118391) current max current is 16000
2025-03-09 07:39:50.113 - debug: kecontact.0 (118391) amperage of mains: 31800/16610/16110, amperage of charging station: 5927/5900/5913 => available: 6127/21290/21803
2025-03-09 07:39:50.113 - debug: kecontact.0 (118391) Available max amperage: 6000
2025-03-09 07:39:50.113 - debug: kecontact.0 (118391) Available surplus: -10515.423999999999
2025-03-09 07:39:50.349 - debug: kecontact.0 (118391) Sent "report 100" to 192.168.5.25:7090
2025-03-09 07:39:50.351 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{
"ID": "100",
"Session ID": 28,
"Curr HW": 16000,
"E start": 517930,
"E pres": 53855,
"started[s]": 1741452594,
"ended[s]": 0,
"started": "2025-03-08 16:49:54.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "043a573aa0169000",
"RFID class": "55d0a976000000000000",
"Serial": "28345628",
"Sec": 1950441
}
"
2025-03-09 07:39:50.351 - debug: kecontact.0 (118391) History ID received: 00
2025-03-09 07:39:51.552 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.25:7090: "{"E pres": 53870}"
2025-03-09 07:39:52.650 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 0,
"Enable user": 0,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 16000,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"X2 phaseSwitch source": 0,
"X2 phaseSwitch": 0,
"Serial": "17405468",
"Sec": 817312
}
"
2025-03-09 07:39:52.652 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:52.729 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:52.949 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 5356,
"E total": 77000002,
"Serial": "17405468",
"Sec": 817312
}
"
2025-03-09 07:39:52.950 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:53.029 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1
2025-03-09 07:39:53.250 - debug: kecontact.0 (118391) UDP datagram from 192.168.5.24:7090: "{
"ID": "100",
"Session ID": 2665,
"Curr HW": 16000,
"E start": 76994646,
"E pres": 5356,
"started[s]": 1741501625,
"ended[s]": 0,
"started": "2025-03-09 06:27:05.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0000000000000000",
"RFID class": "00000000000000000000",
"Serial": "17405468",
"Sec": 817312
}
"
2025-03-09 07:39:53.251 - debug: kecontact.0 (118391) Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
2025-03-09 07:39:53.329 - debug: kecontact.0 (118391) Message from 192.168.5.24 send to kecontact.1