# Configuration for telegraf agent
[agent]
  ## Default data collection interval for all inputs
  interval = "10s"
  ## Rounds collection interval to 'interval'
  ## ie, if interval="10s" then always collect on :00, :10, :20, etc.
  round_interval = true

  ## Telegraf will send metrics to outputs in batches of at most
  ## metric_batch_size metrics.
  ## This controls the size of writes that Telegraf sends to output plugins.
  metric_batch_size = 1000

  ## Maximum number of unwritten metrics per output.  Increasing this value
  ## allows for longer periods of output downtime without dropping metrics at the
  ## cost of higher maximum memory usage.
  metric_buffer_limit = 10000

  ## Collection jitter is used to jitter the collection by a random amount.
  ## Each plugin will sleep for a random time within jitter before collecting.
  ## This can be used to avoid many plugins querying things like sysfs at the
  ## same time, which can have a measurable effect on the system.
  collection_jitter = "0s"

  ## Default flushing interval for all outputs. Maximum flush_interval will be
  ## flush_interval + flush_jitter
  flush_interval = "10s"
  ## Jitter the flush interval by a random amount. This is primarily to avoid
  ## large write spikes for users running a large number of telegraf instances.
  ## ie, a jitter of 5s and interval 10s means flushes will happen every 10-15s
  flush_jitter = "0s"

  ## By default or when set to "0s", precision will be set to the same
  ## timestamp order as the collection interval, with the maximum being 1s.
  ##   ie, when interval = "10s", precision will be "1s"
  ##       when interval = "250ms", precision will be "1ms"
  ## Precision will NOT be used for service inputs. It is up to each individual
  ## service input to set the timestamp at the appropriate precision.
  ## Valid time units are "ns", "us" (or "µs"), "ms", "s".
  precision = ""

  ## Log at debug level.
  # debug = false
  ## Log only error level messages.
  # quiet = false

  ## Log target controls the destination for logs and can be one of "file",
  ## "stderr" or, on Windows, "eventlog".  When set to "file", the output file
  ## is determined by the "logfile" setting.
  # logtarget = "file"

  ## Name of the file to be logged to when using the "file" logtarget.  If set to
  ## the empty string then logs are written to stderr.
  # logfile = ""

  ## The logfile will be rotated after the time interval specified.  When set
  ## to 0 no time based rotation is performed.  Logs are rotated only when
  ## written to, if there is no log activity rotation may be delayed.
  # logfile_rotation_interval = "0d"

  ## The logfile will be rotated when it becomes larger than the specified
  ## size.  When set to 0 no size based rotation is performed.
  # logfile_rotation_max_size = "0MB"

  ## Maximum number of rotated archives to keep, any older logs are deleted.
  ## If set to -1, no archives are removed.
  # logfile_rotation_max_archives = 5

  ## Pick a timezone to use when logging or type 'local' for local time.
  ## Example: America/Chicago
  # log_with_timezone = ""

  ## Override default hostname, if empty use os.Hostname()
  hostname = ""
  ## If set to true, do no set the "host" tag in the telegraf agent.
  omit_hostname = false

 [[inputs.modbus]]

   name = "WP"
   slave_id = 1
   controller = "tcp://10.16.252.100:502"


 holding_registers = [
###### Soll Raum Temperatur ########
      { name = "Ausgewählte Soll-Raumtemperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [3]},
      { name = "Soll-Raumtemperatur für Heizkreis Normalbetrieb", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [4]},
      { name = "Soll-Raumtemperatur für Heizreizkreis Absenkbetrieb", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [5]},
      { name = "Manueller Offset zum setTempNormal", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [6]},
      { name = "Heizkörper VL", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [15]},
      { name = "Heizkörper RL", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [16]},
      { name = "Mischer Auf", byte_order = "AB",   data_type = "FIXED", scale=1.0,  address = [18]},
      { name = "Mischer Zu", byte_order = "AB",   data_type = "FIXED", scale=1.0,  address = [19]},
##### WW Speicher #######
     { name = "WW Temperatur Soll", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [402]},
     { name = "WW Temperatur Ist", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [401]},
#####  PUFFER #####
      { name = "Puffer Temperatur Oben", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [601]},
      { name = "Puffer Temperatur Unten", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [603]},
#      { name = "Puffer Temperatur Soll", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [602]},
#### Kompressor #####
      { name = "WP VL Temperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [705]},
      { name = "WP RL Temperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [710]},
      { name = "Heizleistung", byte_order = "AB",   data_type = "FIXED", scale=0.001,  address = [706]},
      { name = "Quelleneintrittstemperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [709]},
      { name = "Quellenaustrittstemperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [708]},
      { name = "Drehzahl Quellenpumpe/Ventilator", byte_order = "AB",   data_type = "FIXED", scale=1.0,  address = [711]},
      { name = "Drehzahl Heizungsumwälzpumpe", byte_order = "AB",   data_type = "FIXED", scale=1.0,  address = [712]},
      { name = "Kompressordrehzahl", byte_order = "AB",   data_type = "FIXED", scale=1.0,  address = [718]},
      { name = "WP/Puffer Solltemperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [719]},      
      { name = "Stromverbrauch", byte_order = "AB",   data_type = "FIXED", scale=0.001,  address = [1002]},
      { name = "Aussentemperatur", byte_order = "AB",   data_type = "FIXED", scale=0.1,  address = [1502]},
      { name = "Außentemperatur", byte_order = "AB",   data_type = "INT16", scale=0.1,  address = [1502]},

]
# Read metrics from MQTT topic(s)
[[inputs.mqtt_consumer]]
  servers = ["tcp://10.16.252.104:1883"]

qos = 0

topics = [
    "shellypro3em-3ce90e6fea40/status/em:0",
    "shellypro3em-3ce90e6fea40/status/emdata:0",
    "shellypro3em-3ce90e6fea40/status/switch:100",
    "shellyhtg3-ecda3bc38b18/status/temperature:0",
    "shellyhtg3-ecda3bc38b18/status/humidity:0",
    "shellyhtg3-ecda3bc38b18/status/devicepower:0",

    "shellyhtg3-84fce63a98ec/status/temperature:0",
    "shellyhtg3-84fce63a98ec/status/humidity:0",
    "shellyhtg3-84fce63a98ec/status/devicepower:0",
]

  ## Data format to consume.
  data_format = "json"
#  interval = "10s"

# # Read formatted metrics from one or more HTTP endpoints

[[inputs.http]]
  name_override = "sonnenbatterie"
  urls = ["http://10.16.252.11:80/api/v2/latestdata"]
  method = "GET"
  data_format = "json"
  tagexclude = ["hostname"]
  timeout = "3s"
  [inputs.http.headers]
    Auth-Token = "< Eigenen Token innerhalb "" einsetzen >"


#[[processors.join]]
#  name = "combine_measurements"
#  measurers = ["modbus", "mqtt_consumer", "sonnenbatterie"]
#  on = ["_time"]
#  ignore_missing = true

[[outputs.influxdb_v2]]
  urls = ["http://10.16.252.104:8086"]
  token = "< Eigenen Token innerhalb "" einsetzen >"
  organization = "tdi"
  bucket = "telegraf"


# [[outputs.influxdb_v2]]
  ## The URLs of the InfluxDB cluster nodes.
  ##
  ## Multiple URLs can be specified for a single cluster, only ONE of the
  ## urls will be written to each interval.
  ##   ex: urls = ["https://us-west-2-1.aws.cloud2.influxdata.com"]
# urls = ["http://10.16.252.104:8086"]

  ## API token for authentication.


  ## Organization is the name of the organization you wish to write to; must exist.
# organization = "tdi"

  ## Destination bucket to write into.
# bucket = "telegraf"

  ## The value of this tag will be used to determine the bucket.  If this
  ## tag is not set the 'bucket' option is used as the default.
  # bucket_tag = ""

  ## If true, the bucket tag will not be added to the metric.
  # exclude_bucket_tag = false

  ## Timeout for HTTP messages.
  # timeout = "5s"

  ## Additional HTTP headers
  # http_headers = {"X-Special-Header" = "Special-Value"}

  ## HTTP Proxy override, if unset values the standard proxy environment
 ## variables are consulted to determine which proxy, if any, should be used.
  # http_proxy = "http://corporate.proxy:3128"

  ## HTTP User-Agent
  # user_agent = "telegraf"

  ## Content-Encoding for write request body, can be set to "gzip" to
  ## compress body or "identity" to apply no encoding.
  # content_encoding = "gzip"

  ## Enable or disable uint support for writing uints influxdb 2.0.
  # influx_uint_support = false

  ## Optional TLS Config for use on HTTP connections.
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false



